Rotator's upper mount is applied in EYE form factor of the knuckle joint. Robust and tough built to withstand even overloads. The wide of eye is common standard width 73mm and the knuckle pin diameter 30mm.
option
on request by special conditions there are metric nipples available for rotator FHR 5.5F6H
rotator lower size and hydraulic connections
Ø173 17(x6)
mm
GO/GC
3/8"
BSP
GO/GC
3/8"
BSP
Rotator lower mount is applied in FLANGE form factor to mount direct on grapple / tool surface by fixing with screws
option
on request by special conditions there are metric nipples available for rotator FHR 5.5F6H
For forestry
For agriculture and farming
For road and building construction
Rotator FHR 5.5F6H dimension drawings
hydraulic rotator FHR 5.5F6H
is cost-effective solution generally for seasonal use in
forestry, agriculture, road and building construction, general cargo and material handling.
Max load static (tension loads): 55kN
Max load dynamic (tension loads): 32.5kN
Torque at 25MPa: 1300Nm
Weight: 36kg
Recommended oilflow: 22l/min
R
Rotation input (R): 3/8"BSP MAX 250bar
GO
Grapple open input (GO): 3/8"BSP MAX 200bar
GC
Grapple close input (GC): 3/8"BSP MAX 300bar
Rotator's upper mount is applied in EYE form factor of the knuckle joint. Robust and tough built to withstand even overloads. The wide of eye is common standard width 73mm and the knuckle pin diameter 30mm.
Rotator lower mount is applied in FLANGE form factor to mount direct on grapple / tool surface by fixing with screws
Rotator FHR 5.5F6H based on reliable vane type hydraulic motor which delivers torque up to 1300Nm at 25MPa.
Some parts in rotator are built from shock resistant and deformation resistant forged steel.
Formiko rotator FHR 5.5F6H is compatible with
FHL 01-A/B-73/30
and FHL 01B-A/B-73/30
series links.
Rotator for shipping is packed in compact solid cardboard box with dimensions
340x230x240mm.
