Rotator's upper mount is applied in FLANGE form factor. Rotator commonly is used for rigid mounting on the crane tip or in assembly with tilt equipment. Rotator is equipped with locating pins for ease mounting. top.flange.diameter 156mm. top.flange.screw.count 10 10 screws.
option
on request by special conditions there are metric nipples available for rotator FHR 3FF
rotator lower size and hydraulic connections
Ø (x4)
mm
GO/GC
3/8"
BSP
Rotator lower mount is applied in FLANGE form factor to mount direct on grapple / tool surface by fixing with screws
option
on request by special conditions there are metric nipples available for rotator FHR 3FF
For forestry
For road and building construction
Rotator FHR 3FF dimension drawings
hydraulic rotator FHR 3FF
is cost-effective solution generally for seasonal use in
forestry, road and building construction, general cargo and material handling.
Max load static (tension loads): 30kN
Max load dynamic (tension loads): 15kN
Torque at 25MPa: 900Nm
Weight: 21kg
Recommended oilflow: 20l/min
R
Rotation input (R): 3/8"BSP MAX 250bar
GO
Grapple open input (GO): 3/8"BSP MAX 200bar
GC
Grapple close input (GC): 3/8"BSP MAX 300bar
Rotator's upper mount is applied in FLANGE form factor. Rotator commonly is used for rigid mounting on the crane tip or in assembly with tilt equipment. Rotator is equipped with locating pins for ease mounting. top.flange.diameter 156mm. top.flange.screw.count 10 10 screws.
Rotator lower mount is applied in FLANGE form factor to mount direct on grapple / tool surface by fixing with screws
Rotator FHR 3FF based on reliable vane type hydraulic motor which delivers torque up to 900Nm at 25MPa.
Rotator for shipping is packed in compact solid cardboard box with dimensions
340x230x240mm.
