Rotator's upper mount is applied in FORK form factor of the knuckle joint. Robust and tough built to withstand even overloads. The fork width (between fork ends) is common standard width 80mm and the knuckle pin diameter 35mm.
option
on request by special conditions there are metric nipples available for rotator FHR 10LD1H
rotator lower size and hydraulic connections
Ø78 Ø35
mm
GO/GC
1/2"
BSP
Rotator lower mount is applied in AXLE form factor to mount in grapple / tool mounting tube or addaptor and by fixing with pin. Axle (shaft) diameter is 78mm and the fixing pin (not included) diameter 35mm
option
on request by special conditions there are metric nipples available for rotator FHR 10LD1H
For forestry
For cargo and general material handling
For agriculture and farming
For road and building construction
For recycling industry and earthmoving
Rotator FHR 10LD1H dimension drawings
hydraulic rotator FHR 10LD1H
is ideal for professional use in
forestry, agriculture, road and building construction, recycling industry, general cargo and material handling.
Max load static (tension loads): 100kN
Max load static (pushing loads): -80kN
Max load dynamic (tension loads): 50kN
Max load dynamic (pressing loads): -40kN
Torque at 25MPa: 2800Nm
Weight: 56kg
Recommended oilflow: 30l/min
R
Rotation input (R): 1/2"BSP MAX 250bar
GO
Grapple open input (GO): 1/2"BSP MAX 300bar
GC
Grapple close input (GC): 1/2"BSP MAX 250bar
Rotator's upper mount is applied in FORK form factor of the knuckle joint. Robust and tough built to withstand even overloads. The fork width (between fork ends) is common standard width 80mm and the knuckle pin diameter 35mm.
Rotator lower mount is applied in AXLE form factor to mount in grapple / tool mounting tube or addaptor and by fixing with pin. Axle (shaft) diameter is 78mm and the fixing pin (not included) diameter 35mm
Rotator FHR 10LD1H based on reliable vane type hydraulic motor which delivers torque up to 2800Nm at 25MPa.
Formiko Hydraulics rotator FHR 10LD1H is equipped with double bearings to withstand both tensional and pushing loads.
Formiko rotator FHR 10LD1H is compatible with
FHL 02
series links.
Rotator for shipping is packed in compact solid cardboard box with dimensions
400x250x250mm.