download pdf

rotator FHR 1.000L

rotator upper size and hydraulic connections

L45 Ø25

1/4"

BSP

250

bar

GO/GC

1/4"

BSP

200

bar

300

bar

Rotator's upper mount is applied in EYE form factor of the knuckle joint. Robust and tough built to withstand even overloads. The wide of eye is common standard width 45mm and the knuckle pin diameter 25mm.

option

on request by special conditions there are metric nipples available for rotator FHR 1.000L

rotator lower size and hydraulic connections

Ø39.5 Ø20

GO/GC

1/4"

BSP

Rotator lower mount is applied in AXLE form factor to mount in grapple / tool mounting tube or addaptor and by fixing with pin. Axle (shaft) diameter is 39.5mm and the fixing pin (not included) diameter 20mm

option

on request by special conditions there are metric nipples available for rotator FHR 1.000L

For forestry

Rotator FHR 1.000L dimension drawings

hydraulic rotator FHR 1.000L is cost-effective solution generally for seasonal use in forestry, general cargo and material handling.

Max load static (tension loads): 10kN

Max load dynamic (tension loads): 5kN

Torque at 25MPa: 350Nm

Weight: 12kg

Recommended oilflow: 10l/min

Rotation input (R): 1/4"BSP MAX 250bar

Grapple open input (GO): 1/4"BSP MAX 200bar

Grapple close input (GC): 1/4"BSP MAX 300bar

Rotator's upper mount is applied in EYE form factor of the knuckle joint. Robust and tough built to withstand even overloads. The wide of eye is common standard width 45mm and the knuckle pin diameter 25mm.

Rotator lower mount is applied in AXLE form factor to mount in grapple / tool mounting tube or addaptor and by fixing with pin. Axle (shaft) diameter is 39.5mm and the fixing pin (not included) diameter 20mm

Rotator FHR 1.000L based on reliable vane type hydraulic motor which delivers torque up to 350Nm at 25MPa.

Formiko rotator FHR 1.000L is compatible with FHL 01-A/B-45/25 series links.

rotator FHR 1.000L

rotator upper size and hydraulic connections

option

rotator lower size and hydraulic connections

option

Rotator FHR 1.000L dimension drawings

hydraulic rotator FHR 1.000L is cost-effective solution generally for seasonal use in forestry, general cargo and material handling.

Max load static (tension loads): 10kN

Max load dynamic (tension loads): 5kN

Torque at 25MPa: 350Nm

Weight: 12kg

Recommended oilflow: 10l/min

Rotation input (R): 1/4"BSP MAX 250bar

Grapple open input (GO): 1/4"BSP MAX 200bar

Grapple close input (GC): 1/4"BSP MAX 300bar

Rotator's upper mount is applied in EYE form factor of the knuckle joint. Robust and tough built to withstand even overloads. The wide of eye is common standard width 45mm and the knuckle pin diameter 25mm.

Rotator lower mount is applied in AXLE form factor to mount in grapple / tool mounting tube or addaptor and by fixing with pin. Axle (shaft) diameter is 39.5mm and the fixing pin (not included) diameter 20mm

Rotator FHR 1.000L based on reliable vane type hydraulic motor which delivers torque up to 350Nm at 25MPa.

Formiko rotator FHR 1.000L is compatible with FHL 01-A/B-45/25 series links.

Rotator for shipping is packed in compact solid cardboard box with dimensions 280x180x180mm.

We providing TWO year warranty for this rotator.