Rotator's upper mount is applied in EYE form factor of the knuckle joint. Robust and tough built to withstand even overloads. The wide of eye is common standard width 73mm and the knuckle pin diameter 25mm.
option
on request by special conditions there are metric nipples available for rotator FHR 4.5L
rotator lower size and hydraulic connections
Ø59 Ø30
mm
GO/GC
3/8"
BSP
Rotator lower mount is applied in AXLE form factor to mount in grapple / tool mounting tube or addaptor and by fixing with pin. Axle (shaft) diameter is 59mm and the fixing pin (not included) diameter 30mm
option
on request by special conditions there are metric nipples available for rotator FHR 4.5L
For forestry
For agriculture and farming
For road and building construction
Rotator FHR 4.5L dimension drawings
hydraulic rotator FHR 4.5L
is cost-effective solution generally for seasonal use in
forestry, agriculture, road and building construction, general cargo and material handling.
Max load static (tension loads): 45kN
Max load dynamic (tension loads): 22.5kN
Torque at 25MPa: 1200Nm
Weight: 24kg
Recommended oilflow: 20l/min
R
Rotation input (R): 3/8"BSP MAX 250bar
GO
Grapple open input (GO): 3/8"BSP MAX 200bar
GC
Grapple close input (GC): 3/8"BSP MAX 300bar
Rotator's upper mount is applied in EYE form factor of the knuckle joint. Robust and tough built to withstand even overloads. The wide of eye is common standard width 73mm and the knuckle pin diameter 25mm.
Rotator lower mount is applied in AXLE form factor to mount in grapple / tool mounting tube or addaptor and by fixing with pin. Axle (shaft) diameter is 59mm and the fixing pin (not included) diameter 30mm
Rotator FHR 4.5L based on reliable vane type hydraulic motor which delivers torque up to 1200Nm at 25MPa.
Formiko rotator FHR 4.5L is compatible with
FHL 01-A/B-73/25
and FHL 01B-A/B-73/25
series links.
Rotator for shipping is packed in compact solid cardboard box with dimensions
340x230x240mm.