Rotator's upper mount is applied in FORK form factor of the knuckle joint. Robust and tough built to withstand even overloads. The fork width (between fork ends) is common standard width 80mm and the knuckle pin diameter 35mm.
option
on request by special conditions there are metric nipples available for rotator FHR 6LD2-68
rotator lower size and hydraulic connections
Ø68 Ø30
mm
GO/GC
1/2"
BSP
Rotator lower mount is applied in AXLE form factor to mount in grapple / tool mounting tube or addaptor and by fixing with pin. Axle (shaft) diameter is 68mm and the fixing pin (not included) diameter 30mm
option
on request by special conditions there are metric nipples available for rotator FHR 6LD2-68
For forestry
For cargo and general material handling
For agriculture and farming
For road and building construction
For recycling industry and earthmoving
Rotator FHR 6LD2-68 dimension drawings
hydraulic rotator FHR 6LD2-68
is ideal for professional use in
forestry, agriculture, road and building construction, recycling industry, general cargo and material handling.
Max load static (tension loads): 60kN
Max load static (pushing loads): -50kN
Max load dynamic (tension loads): 30kN
Max load dynamic (pressing loads): -25kN
Torque at 25MPa: 1850Nm
Weight: 39kg
Recommended oilflow: 25l/min
R
Rotation input (R): 1/2"BSP MAX 250bar
GO
Grapple open input (GO): 1/2"BSP MAX 250bar
GC
Grapple close input (GC): 1/2"BSP MAX 300bar
Rotator's upper mount is applied in FORK form factor of the knuckle joint. Robust and tough built to withstand even overloads. The fork width (between fork ends) is common standard width 80mm and the knuckle pin diameter 35mm.
Rotator lower mount is applied in AXLE form factor to mount in grapple / tool mounting tube or addaptor and by fixing with pin. Axle (shaft) diameter is 68mm and the fixing pin (not included) diameter 30mm
Rotator FHR 6LD2-68 based on reliable vane type hydraulic motor which delivers torque up to 1850Nm at 25MPa.
Formiko Hydraulics rotator FHR 6LD2-68 is equipped with double bearings to withstand both tensional and pushing loads.
FHR 6LD2-68 is designed with opposite hydraulic channels, to ease the hose replacement in case of rupture.
Formiko rotator FHR 6LD2-68 is compatible with
FHL 02
series links.
Rotator for shipping is packed in compact solid cardboard box with dimensions
400x250x250mm.
