Rotator's upper mount is applied in EYE form factor of the knuckle joint. Robust and tough built to withstand even overloads. The wide of eye is common standard width mm and the knuckle pin diameter 144mm.
option
on request by special conditions there are metric nipples available for rotator FHR 5.5FF140
rotator lower size and hydraulic connections
□140 Ø17(x4)
mm
GO/GC
3/8"
BSP
GO/GC
3/8"
BSP
Rotator lower mount is applied in SQUARE shape FLANGE form factor to mount dirrect on grapple / tool surface by fixing with screws
option
on request by special conditions there are metric nipples available for rotator FHR 5.5FF140
For forestry
For agriculture and farming
For road and building construction
Rotator FHR 5.5FF140 dimension drawings
hydraulic rotator FHR 5.5FF140
is cost-effective solution generally for seasonal use in
forestry, agriculture, road and building construction, general cargo and material handling.
Max load static (tension loads): 55kN
Max load dynamic (tension loads): 32.5kN
Torque at 25MPa: 1300Nm
Weight: 35kg
Recommended oilflow: 22l/min
R
Rotation input (R): 3/8"BSP MAX 250bar
GO
Grapple open input (GO): 3/8"BSP MAX 200bar
GC
Grapple close input (GC): 3/8"BSP MAX 300bar
Rotator's upper mount is applied in EYE form factor of the knuckle joint. Robust and tough built to withstand even overloads. The wide of eye is common standard width mm and the knuckle pin diameter 144mm.
Rotator lower mount is applied in SQUARE shape FLANGE form factor to mount dirrect on grapple / tool surface by fixing with screws
Rotator FHR 5.5FF140 based on reliable vane type hydraulic motor which delivers torque up to 1300Nm at 25MPa.
Some parts in rotator are built from shock resistant and deformation resistant forged steel.
Rotator for shipping is packed in compact solid cardboard box with dimensions
340x230x240mm.
