Rotator's upper mount is applied in FORK form factor of the knuckle joint. Robust and tough built to withstand even overloads. The fork width (between fork ends) is common standard width 100mm and the knuckle pin diameter 45mm.
option
on request by special conditions there are metric nipples available for rotator FHR 16FD1
rotator lower size and hydraulic connections
Ø173 17(x6)
mm
GO/GC
1/2"
BSP
GO/GC
1/2"
BSP
Rotator lower mount is applied in FLANGE form factor to mount direct on grapple / tool surface by fixing with screws
option
on request by special conditions there are metric nipples available for rotator FHR 16FD1
For forestry
For cargo and general material handling
For agriculture and farming
For road and building construction
For recycling industry and earthmoving
Rotator FHR 16FD1 dimension drawings
hydraulic rotator FHR 16FD1
designed for heavy duty machinery to meet the highest demands for quality and reliability. Ideal for intensive professional use in
forestry, agriculture, road and building construction, recycling industry, general cargo and material handling.
Max load static (tension loads): 160kN
Max load static (pushing loads): -130kN
Max load dynamic (tension loads): 80kN
Max load dynamic (pressing loads): -65kN
Torque at 25MPa: 3400Nm
Weight: 72kg
Recommended oilflow: 40l/min
R
Rotation input (R): 1/2"BSP MAX 250bar
GO
Grapple open input (GO): 1/2"BSP MAX 250bar
GC
Grapple close input (GC): 1/2"BSP MAX 300bar
Rotator's upper mount is applied in FORK form factor of the knuckle joint. Robust and tough built to withstand even overloads. The fork width (between fork ends) is common standard width 100mm and the knuckle pin diameter 45mm.
Rotator lower mount is applied in FLANGE form factor to mount direct on grapple / tool surface by fixing with screws
Rotator FHR 16FD1 based on reliable vane type hydraulic motor which delivers torque up to 3400Nm at 25MPa.
Formiko Hydraulics rotator FHR 16FD1 is equipped with double bearings to withstand both tensional and pushing loads.
Some parts in rotator are built from shock resistant and deformation resistant forged steel.
Formiko rotator FHR 16FD1 is compatible with
FHL 03
series links.
Rotator for shipping is packed in compact solid cardboard box with dimensions
450x250x250mm.
